Author Topic: 2276 CC Engine Break In.  (Read 6447 times)

0 Members and 1 Guest are viewing this topic.

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
2276 CC Engine Break In.
« on: October 24, 2010, 09:41:01 PM »
Did the break in and after 15 minutes of running I hear a ching ching ching a ling and ding..... I pop out the caps and look what i see....

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
Re: 2276 CC Engine Break In.
« Reply #1 on: October 24, 2010, 09:42:02 PM »
This what i found at the bottom of the rocker....

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: 2276 CC Engine Break In.
« Reply #2 on: October 24, 2010, 10:09:36 PM »
Dual springs, and ratio rockers!  Just put them back in, make sure they are seated all the way down and do a valve adjustment on all the other arms. With chromoly pushrods adjust to a loose "0". How did it sound with the 45 Dells?

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
Re: 2276 CC Engine Break In.
« Reply #3 on: October 24, 2010, 11:55:02 PM »
Did not really Rev Engine to a full idle but it sounded pretty good....I will have to drain the oil and probably start it up again...before I install it...Stage 2 with a Daiken Disk....

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: 2276 CC Engine Break In.
« Reply #4 on: October 25, 2010, 12:02:03 AM »
to break in the engine you need to rev it from idle to 2000 rpm for 15-20 minutes, then change the oil.

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
Re: 2276 CC Engine Break In.
« Reply #5 on: October 25, 2010, 01:10:23 AM »
im a little scareddddd, it is halloween....

Offline Carlos Spicywiener

  • Full Member
  • ***
  • Posts: 50
Re: 2276 CC Engine Break In.
« Reply #6 on: October 26, 2010, 12:02:17 AM »
am i missing something or are you just saying that the lash caps fell out?
Echo 3 to Echo 7. Han, old buddy, you read me?
Luke, I thought we talked about this. I changed my code name.
Oh, right. Sorry. Echo 3 to Carlos Spicy Wiener.

Offline slammed66

  • Administrator
  • Hero Member
  • *****
  • Posts: 426
Re: 2276 CC Engine Break In.
« Reply #7 on: October 31, 2010, 12:09:51 PM »
1000th post on the board

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
Re: 2276 CC Engine Break In.
« Reply #8 on: November 02, 2010, 12:45:00 AM »
Who gives a shit...a thousand dollars later. Dude  I got bigger Problems I will post tomorrow the pics.  Got oil seaping through a crack in the Case..... Biatches....Last Big Motor I will ever get built.......Shit!  Need to get a new CASE probably at RIMCO.  What is the price of going these days.....

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: 2276 CC Engine Break In.
« Reply #9 on: November 02, 2010, 01:13:53 AM »
8 bones

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
Re: 2276 CC Engine Break In.
« Reply #10 on: November 02, 2010, 01:29:20 AM »
Is that with Discount!!

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: 2276 CC Engine Break In.
« Reply #11 on: November 02, 2010, 01:37:41 AM »
call and check. save on shipping and go pick it up.

Where did the old case crack?

Offline 64Notch

  • OG Luftvolks
  • Hero Member
  • *********
  • Posts: 291
Re: 2276 CC Engine Break In.
« Reply #12 on: November 02, 2010, 03:06:07 AM »
near the oil cooler

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: 2276 CC Engine Break In.
« Reply #13 on: November 02, 2010, 11:40:54 PM »
weak. did the flange crack or the block itself.

Pics please.

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: 2276 CC Engine Break In.
« Reply #14 on: November 13, 2010, 03:52:22 AM »
where are the pics? I got to see the conomac special