Author Topic: Headlights on a 67  (Read 6203 times)

0 Members and 1 Guest are viewing this topic.

Offline slammed66

  • Administrator
  • Hero Member
  • *****
  • Posts: 426
Re: Headlights on a 67
« Reply #15 on: September 10, 2010, 07:45:41 PM »
if you hit the dimmer does it switch the dim light, in other words one high beam one low beam, as if one set of wires is crossed

Offline scratchyratchy

  • Nor Cal Luftvolks
  • Hero Member
  • *****
  • Posts: 285
  • MARTY!!!
Re: Headlights on a 67
« Reply #16 on: September 11, 2010, 01:13:38 AM »
if you hit the dimmer does it switch the dim light, in other words one high beam one low beam, as if one set of wires is crossed

I'm not really sure?  when i press the highlight button, it goes to highlights (except for the driver side)...  Checked the ground and it's pretty grounded.  i don't know if it's that 3 prong female?  does it need to be clean or pinched a little bit? 

Offline scratchyratchy

  • Nor Cal Luftvolks
  • Hero Member
  • *****
  • Posts: 285
  • MARTY!!!
Re: Headlights on a 67
« Reply #17 on: February 01, 2011, 11:45:36 PM »
got a new problem with my head lights...  passenger side lights are not working.  went to work last night and it was fine.  then this morning it wasn't.  checked the bulb and they were fine.  checked the ground and wiring and everything seems fine.  i even replaced with a new head lamp and STILL woudn't work! 

anybody got any ideas? 

Offline LUFTVOLKS

  • Administrator
  • Hero Member
  • *****
  • Posts: 809
  • BangBusBaby!!
Re: Headlights on a 67
« Reply #18 on: February 02, 2011, 01:28:57 AM »
Replace or clean the fuses and sand the little arms on the fuse block to make sure there is no corrosion. Get some electrical grease and put a bit on the tips of the fuses before you put them in.



Offline scratchyratchy

  • Nor Cal Luftvolks
  • Hero Member
  • *****
  • Posts: 285
  • MARTY!!!
Re: Headlights on a 67
« Reply #19 on: February 02, 2011, 10:26:35 AM »
thanks luft!...  will check on it later today....

Offline slammed66

  • Administrator
  • Hero Member
  • *****
  • Posts: 426
Re: Headlights on a 67
« Reply #20 on: February 03, 2011, 10:29:43 AM »
Replace or clean the fuses and sand the little arms on the fuse block to make sure there is no corrosion. Get some electrical grease and put a bit on the tips of the fuses before you put them in.




thats usually the problem

hate those fuses

Offline scratchyratchy

  • Nor Cal Luftvolks
  • Hero Member
  • *****
  • Posts: 285
  • MARTY!!!
Re: Headlights on a 67
« Reply #21 on: February 03, 2011, 06:48:09 PM »
Yup!...  it was those F@*KIN" FUSES!!!